絮凝剂 ɑtA-F101
描叙与使用
絮凝剂/混凝剂用于降低浊度和颜色，设计用于反渗透膜的上游。
用于反渗透预处理设备的絮凝剂/混凝剂。
提高多媒体和盒式过滤器的性能，从而降低浑浊度和颜色，以获得更好的反渗透给水质量经济的使用。
含有8%的可溶性铁离子，可与低电荷密度的有机聚合物混合。
与聚酰胺和醋酸纤维素膜兼容。
在较宽的pH值范围内有效，但应在pH < 7时使用，以尽量减少铁离子结转。
典型性状
外观···············································································································································································暗褐色液体
气味···············································································································································································特征性气味
pH@(25℃)············································································································································································≤2.0
溶水性··············································································································································································完全溶解
密度·································································································································································1.20±0.05(g/cm³)
化学制剂添加与控制
根据jar测试结果，可以在1 – 30ppm之间的任何地方使用。ɑtA-F101是酸性的，如果没有足够的碱度，可以降低水的pH值(每1ppm ɑtA-F101的最低碱度为0.25 ppm)。过量使用可能导致铁离子结转，并可能导致悬浮物的净分散效果——根据jar测试结果，应保持用量。如有任何疑问，请与澳洲未池有限公司联系，了解具体剂量说明。
如果可能的话，应该清洗干净。如果需要稀释，用RO渗透水或DI水稀释不超过4比1。应注入至少15英尺(5米)以上的多媒体或墨盒过滤器，以便充分混合和凝固。不要使用过滤器前的静态混合器，因为该设备产生的剪切力会降解该配方中所含的聚合物。
安全和操作
ɑtA-F101吞食可能有毒。与眼睛接触会引起严重刺激或灼伤以及不可逆转的眼睛损伤。操作本产品时，建议使用护目镜或面罩和橡胶手套。有关更多信息，请参阅提供的安全数据表（MSDS）使用本产品。
包装
ɑtA-F101以25公斤不可返还塑料桶包装。
产品下载： ATA-F101
