用于膜系统的专用杀菌剂ɑtA-Q180
描叙与使用
ɑtA-Q180是一种广谱型液态杀微生物制剂，用于超滤系统和非医药/非饮用水反渗透膜系统。一旦与微生物接触，本品能够立刻抑制其生长。
ɑtA-Q180是快速、无泡沫、非氧化性杀菌剂。
ɑtA-Q180对已经存在的生物膜十分有效，同时抑制新的生物膜的生长。
ɑtA-Q180能够有效适用的pH、温度和水硬度范围很大。
ɑtA-Q180稀释后易于生物降解。
ɑtA-Q180与低含量的自由氯和溴以及防垢剂兼容。
ɑtA-Q180在低浓度下有效。
典型性状
外观··································································································································································透明至琥珀色液体
气味·······································································································································································轻微防腐性气味
pH@(25℃)···············································································································································································3-5
溶水性···············································································································································································完全溶解
密度.·································································································································································1.10±0.05(g/cm³)
化学制剂添加与控制
ɑtA-Q180可用于控制非饮用工业膜系统（反渗透、超滤、微滤）和外围设备中的细菌和减少生物污染。应用范围包括为生产锅炉补给水的反渗透系统加药、电气部件的冲洗和工业废水处理。
ɑtA-Q180应添加到系统进水或反渗透装置前面的任何其他污染区域之前。根据污染严重程度和膜制造商规定的指南，间歇添加计量泵。
可以以10到100 ppm的速率连续向膜系统给水中加入ɑtA-Q180。处理完成后，应继续用给水冲洗，直到渗透物的电导率值达到或低于处理前的值。严重污染的系统必须在开始处理之前进行清洁。对于离线系统消毒，将50-170 ppm ɑtA-Q180添加到离线清洗进料罐中，并重新循环30分钟至3小时。每5天或根据需要添加一次。
注：对于不能有ɑtA-Q180残留物的工业系统，必须采用缓动式进料。在化学添加后的30分钟至1小时内，渗透液和浓缩液必须转移到废物中。
安全和操作
ɑtA-Q180吞食可能有毒。与眼睛接触会引起严重刺激或灼伤以及不可逆转的眼睛损伤。操作本产品时，建议使用护目镜或面罩和橡胶手套。有关更多信息，请参阅提供的安全数据表（MSDS）使用本产品。
包装
ɑtA-Q180以25公斤不可返还塑料桶包装。
产品下载：ATA-Q180
